Configuration Procedure For PSC08U-01Q01E (Satellite C655)

The following procedure MUST be completed EVERY TIME you replace the system board.

These configuration instructions are unique to the Toshiba "Satellite C655" having Model-Part Number, "PSC08U-01Q01E". You must verify that the Model Part Number for the unit you're configuring is "PSC08U-01Q01E".

Configuration Instruction

  1. Boot the T&D media.
  2. Select the option for DMI Write.
  3. Position the cursor at the beginning of the Manufacture field. Type Toshibathen press Enter.
  4. Position the cursor at the beginning of the Product Name field. Type Satellite C655 then press Enter.
  5. Position the cursor at the beginning of the Version field. Type PSC08U-01Q01E then press Enter.
  6. Position the cursor at the beginning of the Serial Number field. Type the serial number from the unit label then press Enter.
  7. Position the cursor at the beginning of the OEM Part Number field. Type PSC08U-01Q01E then press Enter.
  8. Position the cursor at the beginning of the OEM SW Number field. Type TI105847W0F,13L01 then press Enter.
  9. Review the entries. If all DMI information is entered correctly, press F2 confirming the changes. If the information is not correct, press F4 and make the necessary corrections.
  10. Once all entries are correct, press F2 confirming the changes then press F2 again to save the changes.
  11. Press Escape.
  12. Exit T&D.
  13. Boot the T&D media.
  14. Select the option for DMI Read and verify the entries are correct.
  15. If all entries are correct, DMI entry is complete. Exit T&D and boot to Windows.